Robotrontechnik-Forum
Registrieren || Einloggen || Hilfe/FAQ || Suche || Mitglieder || Home || Statistik || Kalender || Admins Willkommen Gast! RSS

Robotrontechnik-Forum » Technische Diskussionen » Kicad EFS DIN64 » Themenansicht

Autor Thread - Seiten: -1-
000
06.10.2021, 16:32 Uhr
Hobi



 Gibt es ein kicad Modell für den Kombistecker EFS/DIN für die Buserweiterung?
--
-------------------------------------------
Corontäne
-------------------------------------------
Seitenanfang Seitenende
Profil || Private Nachricht || Suche Zitatantwort || Editieren || Löschen
001
06.10.2021, 18:17 Uhr
HolgerT



 Ich hatte da mal was entworfen. Noch nicht realisiert, deshalb keine Garantie auf Richtigkeit.

Gruß Holger

--äähhm: Wie kann ich eine Datei, die kein Bild ist, hier hochladen?
Dieser Beitrag wurde am 06.10.2021 um 18:17 Uhr von HolgerT editiert.
Seitenanfang Seitenende
Profil || Private Nachricht || Suche Zitatantwort || Editieren || Löschen
002
06.10.2021, 18:23 Uhr
ambrosius



 Das geht leider nicht.
--
viele Grüße
Holger
Seitenanfang Seitenende
Profil || Private Nachricht || Suche Zitatantwort || Editieren || Löschen
003
06.10.2021, 18:40 Uhr
HolgerT



 OK - 3 Dateien (für KiCad 5):
1. Datei: K1520.dcm:

Quellcode:

EESchema-DOCLIB  Version 2.0
#
$CMP K1520
D K1520-Busstecker (Pinnamen)
F Anschluß nach: http://www.robotrontechnik.de/index.htm?/html/standards/k1520.htm
$ENDCMP
#
$CMP K1520_2x29-AC
D K1520-Busstecker (Pinnummern)
F Anschluß nach: http://www.robotrontechnik.de/index.htm?/html/standards/k1520.htm
$ENDCMP



2. Datei K1520.lib:

Quellcode:

EESchema-LIBRARY Version 2.4
#encoding utf-8
#
# K1520
#
DEF K1520 X 0 20 Y Y 1 F N
F0 "X" -500 1950 50 H V C CNN
F1 "K1520" -350 1950 50 H V L CNN
F2 "" 0 50 50 H I C CNN
F3 "" 0 50 50 H I C CNN
$FPLIST
EFS2x29_K1520
DIN41612_K1520
$ENDFPLIST
DRAW
P 6 0 1 0 -365 -595 -340 -595 -325 -595 -325 -605 -365 -605 -365 -595 N
P 6 0 1 0 -365 -495 -340 -495 -325 -495 -325 -505 -365 -505 -365 -495 N
P 6 0 1 0 -365 -395 -340 -395 -325 -395 -325 -405 -365 -405 -365 -395 N
P 6 0 1 0 -365 -295 -340 -295 -325 -295 -325 -305 -365 -305 -365 -295 N
P 6 0 1 0 -365 -195 -340 -195 -325 -195 -325 -205 -365 -205 -365 -195 N
P 6 0 1 0 -365 -95 -340 -95 -325 -95 -325 -105 -365 -105 -365 -95 N
P 6 0 1 0 -365 5 -340 5 -325 5 -325 -5 -365 -5 -365 5 N
P 6 0 1 0 -365 105 -340 105 -325 105 -325 95 -365 95 -365 105 N
P 6 0 1 0 -365 205 -340 205 -325 205 -325 195 -365 195 -365 205 N
P 6 0 1 0 -365 305 -340 305 -325 305 -325 295 -365 295 -365 305 N
P 6 0 1 0 -365 405 -340 405 -325 405 -325 395 -365 395 -365 405 N
P 6 0 1 0 -365 505 -340 505 -325 505 -325 495 -365 495 -365 505 N
P 6 0 1 0 -365 605 -340 605 -325 605 -325 595 -365 595 -365 605 N
P 6 0 1 0 -365 705 -340 705 -325 705 -325 695 -365 695 -365 705 N
P 6 0 1 0 -365 805 -340 805 -325 805 -325 795 -365 795 -365 805 N
P 6 0 1 0 -365 905 -340 905 -325 905 -325 895 -365 895 -365 905 N
P 6 0 1 0 -365 1105 -340 1105 -325 1105 -325 1095 -365 1095 -365 1105 N
P 6 0 1 0 -365 1205 -340 1205 -325 1205 -325 1195 -365 1195 -365 1205 N
P 6 0 1 0 -365 1305 -340 1305 -325 1305 -325 1295 -365 1295 -365 1305 N
P 6 0 1 0 -365 1405 -340 1405 -325 1405 -325 1395 -365 1395 -365 1405 N
P 6 0 1 0 -365 1505 -340 1505 -325 1505 -325 1495 -365 1495 -365 1505 N
P 6 0 1 0 -365 1605 -340 1605 -325 1605 -325 1595 -365 1595 -365 1605 N
P 6 0 1 0 -365 1705 -340 1705 -325 1705 -325 1695 -365 1695 -365 1705 N
P 6 0 1 0 -365 1805 -340 1805 -325 1805 -325 1795 -365 1795 -365 1805 N
P 6 0 1 0 485 -1995 510 -1995 525 -1995 525 -2005 485 -2005 485 -1995 N
P 6 0 1 0 485 -1895 510 -1895 525 -1895 525 -1905 485 -1905 485 -1895 N
P 6 0 1 0 485 -1795 510 -1795 525 -1795 525 -1805 485 -1805 485 -1795 N
P 6 0 1 0 485 -1695 510 -1695 525 -1695 525 -1705 485 -1705 485 -1695 N
P 6 0 1 0 485 -1595 510 -1595 525 -1595 525 -1605 485 -1605 485 -1595 N
P 6 0 1 0 485 -1495 510 -1495 525 -1495 525 -1505 485 -1505 485 -1495 N
P 6 0 1 0 485 -1395 510 -1395 525 -1395 525 -1405 485 -1405 485 -1395 N
P 6 0 1 0 485 -1295 510 -1295 525 -1295 525 -1305 485 -1305 485 -1295 N
P 6 0 1 0 485 -1195 510 -1195 525 -1195 525 -1205 485 -1205 485 -1195 N
P 6 0 1 0 485 -1095 510 -1095 525 -1095 525 -1105 485 -1105 485 -1095 N
P 6 0 1 0 485 -995 510 -995 525 -995 525 -1005 485 -1005 485 -995 N
P 6 0 1 0 485 -895 510 -895 525 -895 525 -905 485 -905 485 -895 N
P 6 0 1 0 485 -795 510 -795 525 -795 525 -805 485 -805 485 -795 N
P 6 0 1 0 485 -695 510 -695 525 -695 525 -705 485 -705 485 -695 N
P 6 0 1 0 485 -495 510 -495 525 -495 525 -505 485 -505 485 -495 N
P 6 0 1 0 485 -395 510 -395 525 -395 525 -405 485 -405 485 -395 N
P 6 0 1 0 485 -295 510 -295 525 -295 525 -305 485 -305 485 -295 N
P 6 0 1 0 485 -95 510 -95 525 -95 525 -105 485 -105 485 -95 N
P 6 0 1 0 485 5 510 5 525 5 525 -5 485 -5 485 5 N
P 6 0 1 0 485 105 510 105 525 105 525 95 485 95 485 105 N
P 6 0 1 0 485 205 510 205 525 205 525 195 485 195 485 205 N
P 6 0 1 0 485 405 510 405 525 405 525 395 485 395 485 405 N
P 6 0 1 0 485 505 510 505 525 505 525 495 485 495 485 505 N
P 6 0 1 0 485 705 510 705 525 705 525 695 485 695 485 705 N
P 6 0 1 0 485 805 510 805 525 805 525 795 485 795 485 805 N
P 6 0 1 0 485 1005 510 1005 525 1005 525 995 485 995 485 1005 N
P 6 0 1 0 485 1105 510 1105 525 1105 525 1095 485 1095 485 1105 N
P 6 0 1 0 485 1205 510 1205 525 1205 525 1195 485 1195 485 1205 N
P 6 0 1 0 485 1305 510 1305 525 1305 525 1295 485 1295 485 1305 N
P 6 0 1 0 485 1405 510 1405 525 1405 525 1395 485 1395 485 1405 N
P 6 0 1 0 485 1505 510 1505 525 1505 525 1495 485 1495 485 1505 N
P 6 0 1 0 485 1605 510 1605 525 1605 525 1595 485 1595 485 1605 N
P 6 0 1 0 485 1705 510 1705 525 1705 525 1695 485 1695 485 1705 N
P 6 0 1 0 485 1805 510 1805 525 1805 525 1795 485 1795 485 1805 N
X 12N 12N1 300 -1900 225 R 50 50 1 1 P
X 12N 12N2 300 -2000 225 R 50 50 1 1 P
X 12P 12P1 300 -700 225 R 50 50 1 1 P
X 12P 12P2 300 -800 225 R 50 50 1 1 P
X 5N 5N1 300 -1700 225 R 50 50 1 1 P
X 5N 5N2 300 -1800 225 R 50 50 1 1 P
X 5P 5P1 300 -900 225 R 50 50 1 1 P
X 5P 5P2 300 -1000 225 R 50 50 1 1 P
X AB_00 AB_00 -550 900 225 R 50 50 1 1 P
X AB_01 AB_01 -550 800 225 R 50 50 1 1 P
X AB_02 AB_02 -550 700 225 R 50 50 1 1 P
X AB_03 AB_03 -550 600 225 R 50 50 1 1 P
X AB_04 AB_04 -550 500 225 R 50 50 1 1 P
X AB_05 AB_05 -550 400 225 R 50 50 1 1 P
X AB_06 AB_06 -550 300 225 R 50 50 1 1 P
X AB_07 AB_07 -550 200 225 R 50 50 1 1 P
X AB_08 AB_08 -550 100 225 R 50 50 1 1 P
X AB_09 AB_09 -550 0 225 R 50 50 1 1 P
X AB_10 AB_10 -550 -100 225 R 50 50 1 1 P
X AB_11 AB_11 -550 -200 225 R 50 50 1 1 P
X AB_12 AB_12 -550 -300 225 R 50 50 1 1 P
X AB_13 AB_13 -550 -400 225 R 50 50 1 1 P
X AB_14 AB_14 -550 -500 225 R 50 50 1 1 P
X AB_15 AB_15 -550 -600 225 R 50 50 1 1 P
X CASG CASG 300 1000 225 R 50 50 1 1 P
X CLK CLK 300 400 225 R 50 50 1 1 P
X DB_0 DB_0 -550 1800 225 R 50 50 1 1 P
X DB_1 DB_1 -550 1700 225 R 50 50 1 1 P
X DB_2 DB_2 -550 1600 225 R 50 50 1 1 P
X DB_3 DB_3 -550 1500 225 R 50 50 1 1 P
X DB_4 DB_4 -550 1400 225 R 50 50 1 1 P
X DB_5 DB_5 -550 1300 225 R 50 50 1 1 P
X DB_6 DB_6 -550 1200 225 R 50 50 1 1 P
X DB_7 DB_7 -550 1100 225 R 50 50 1 1 P
X GND GND1 300 -1100 225 R 50 50 1 1 P
X GND GND2 300 -1300 225 R 50 50 1 1 P
X GND GND3 300 -1200 225 R 50 50 1 1 P
X GND GND4 300 -1400 225 R 50 50 1 1 P
X GND GND5 300 -1500 225 R 50 50 1 1 P
X GND GND6 300 -1600 225 R 50 50 1 1 P
X ~BAI ~BAI 300 -400 225 R 50 50 1 1 P
X ~BAO ~BAO 300 -300 225 R 50 50 1 1 P
X ~BUSRQ ~BUSRQ 300 -500 225 R 50 50 1 1 P
X ~HALT ~HALT 300 800 225 R 50 50 1 1 P
X ~IEI ~IEI 300 200 225 R 50 50 1 1 P
X ~IEO ~IEO 300 100 225 R 50 50 1 1 P
X ~INT ~INT 300 0 225 R 50 50 1 1 P
X ~IODI ~IODI 300 1400 225 R 50 50 1 1 P
X ~IORQ ~IORQ 300 1500 225 R 50 50 1 1 P
X ~MEMDI ~MEMDI 300 1800 225 R 50 50 1 1 P
X ~MREQ ~MREQ 300 1600 225 R 50 50 1 1 P
X ~NMI ~NMI 300 -100 225 R 50 50 1 1 P
X ~PM1 ~PM1 300 1700 225 R 50 50 1 1 P
X ~RD ~RD 300 1300 225 R 50 50 1 1 P
X ~RESET ~RESET 300 500 225 R 50 50 1 1 P
X ~RFSH ~RFSH 300 1100 225 R 50 50 1 1 P
X ~WAIT ~WAIT 300 700 225 R 50 50 1 1 P
X ~WR ~WR 300 1200 225 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# K1520_2x29-AC
#
DEF K1520_2x29-AC X 0 20 Y Y 1 F N
F0 "X" -500 1950 50 H V C CNN
F1 "K1520_2x29-AC" -350 1950 50 H V L CNN
F2 "" 0 50 50 H I C CNN
F3 "" 0 50 50 H I C CNN
$FPLIST
EFS2x29AC
DIN41xxx
$ENDFPLIST
DRAW
P 6 0 1 0 -365 -595 -340 -595 -325 -595 -325 -605 -365 -605 -365 -595 N
P 6 0 1 0 -365 -495 -340 -495 -325 -495 -325 -505 -365 -505 -365 -495 N
P 6 0 1 0 -365 -395 -340 -395 -325 -395 -325 -405 -365 -405 -365 -395 N
P 6 0 1 0 -365 -295 -340 -295 -325 -295 -325 -305 -365 -305 -365 -295 N
P 6 0 1 0 -365 -195 -340 -195 -325 -195 -325 -205 -365 -205 -365 -195 N
P 6 0 1 0 -365 -95 -340 -95 -325 -95 -325 -105 -365 -105 -365 -95 N
P 6 0 1 0 -365 5 -340 5 -325 5 -325 -5 -365 -5 -365 5 N
P 6 0 1 0 -365 105 -340 105 -325 105 -325 95 -365 95 -365 105 N
P 6 0 1 0 -365 205 -340 205 -325 205 -325 195 -365 195 -365 205 N
P 6 0 1 0 -365 305 -340 305 -325 305 -325 295 -365 295 -365 305 N
P 6 0 1 0 -365 405 -340 405 -325 405 -325 395 -365 395 -365 405 N
P 6 0 1 0 -365 505 -340 505 -325 505 -325 495 -365 495 -365 505 N
P 6 0 1 0 -365 605 -340 605 -325 605 -325 595 -365 595 -365 605 N
P 6 0 1 0 -365 705 -340 705 -325 705 -325 695 -365 695 -365 705 N
P 6 0 1 0 -365 805 -340 805 -325 805 -325 795 -365 795 -365 805 N
P 6 0 1 0 -365 905 -340 905 -325 905 -325 895 -365 895 -365 905 N
P 6 0 1 0 -365 1105 -340 1105 -325 1105 -325 1095 -365 1095 -365 1105 N
P 6 0 1 0 -365 1205 -340 1205 -325 1205 -325 1195 -365 1195 -365 1205 N
P 6 0 1 0 -365 1305 -340 1305 -325 1305 -325 1295 -365 1295 -365 1305 N
P 6 0 1 0 -365 1405 -340 1405 -325 1405 -325 1395 -365 1395 -365 1405 N
P 6 0 1 0 -365 1505 -340 1505 -325 1505 -325 1495 -365 1495 -365 1505 N
P 6 0 1 0 -365 1605 -340 1605 -325 1605 -325 1595 -365 1595 -365 1605 N
P 6 0 1 0 -365 1705 -340 1705 -325 1705 -325 1695 -365 1695 -365 1705 N
P 6 0 1 0 -365 1805 -340 1805 -325 1805 -325 1795 -365 1795 -365 1805 N
P 6 0 1 0 485 -1995 510 -1995 525 -1995 525 -2005 485 -2005 485 -1995 N
P 6 0 1 0 485 -1895 510 -1895 525 -1895 525 -1905 485 -1905 485 -1895 N
P 6 0 1 0 485 -1795 510 -1795 525 -1795 525 -1805 485 -1805 485 -1795 N
P 6 0 1 0 485 -1695 510 -1695 525 -1695 525 -1705 485 -1705 485 -1695 N
P 6 0 1 0 485 -1595 510 -1595 525 -1595 525 -1605 485 -1605 485 -1595 N
P 6 0 1 0 485 -1495 510 -1495 525 -1495 525 -1505 485 -1505 485 -1495 N
P 6 0 1 0 485 -1395 510 -1395 525 -1395 525 -1405 485 -1405 485 -1395 N
P 6 0 1 0 485 -1295 510 -1295 525 -1295 525 -1305 485 -1305 485 -1295 N
P 6 0 1 0 485 -1195 510 -1195 525 -1195 525 -1205 485 -1205 485 -1195 N
P 6 0 1 0 485 -1095 510 -1095 525 -1095 525 -1105 485 -1105 485 -1095 N
P 6 0 1 0 485 -995 510 -995 525 -995 525 -1005 485 -1005 485 -995 N
P 6 0 1 0 485 -895 510 -895 525 -895 525 -905 485 -905 485 -895 N
P 6 0 1 0 485 -795 510 -795 525 -795 525 -805 485 -805 485 -795 N
P 6 0 1 0 485 -695 510 -695 525 -695 525 -705 485 -705 485 -695 N
P 6 0 1 0 485 -495 510 -495 525 -495 525 -505 485 -505 485 -495 N
P 6 0 1 0 485 -395 510 -395 525 -395 525 -405 485 -405 485 -395 N
P 6 0 1 0 485 -295 510 -295 525 -295 525 -305 485 -305 485 -295 N
P 6 0 1 0 485 -95 510 -95 525 -95 525 -105 485 -105 485 -95 N
P 6 0 1 0 485 5 510 5 525 5 525 -5 485 -5 485 5 N
P 6 0 1 0 485 105 510 105 525 105 525 95 485 95 485 105 N
P 6 0 1 0 485 205 510 205 525 205 525 195 485 195 485 205 N
P 6 0 1 0 485 405 510 405 525 405 525 395 485 395 485 405 N
P 6 0 1 0 485 505 510 505 525 505 525 495 485 495 485 505 N
P 6 0 1 0 485 705 510 705 525 705 525 695 485 695 485 705 N
P 6 0 1 0 485 805 510 805 525 805 525 795 485 795 485 805 N
P 6 0 1 0 485 1005 510 1005 525 1005 525 995 485 995 485 1005 N
P 6 0 1 0 485 1105 510 1105 525 1105 525 1095 485 1095 485 1105 N
P 6 0 1 0 485 1205 510 1205 525 1205 525 1195 485 1195 485 1205 N
P 6 0 1 0 485 1305 510 1305 525 1305 525 1295 485 1295 485 1305 N
P 6 0 1 0 485 1405 510 1405 525 1405 525 1395 485 1395 485 1405 N
P 6 0 1 0 485 1505 510 1505 525 1505 525 1495 485 1495 485 1505 N
P 6 0 1 0 485 1605 510 1605 525 1605 525 1595 485 1595 485 1605 N
P 6 0 1 0 485 1705 510 1705 525 1705 525 1695 485 1695 485 1705 N
P 6 0 1 0 485 1805 510 1805 525 1805 525 1795 485 1795 485 1805 N
X GND A01 300 -1100 225 R 50 50 1 1 P
X GND A02 300 -1300 225 R 50 50 1 1 P
X 12N A03 300 -1900 225 R 50 50 1 1 P
X DB_7 A04 -550 1100 225 R 50 50 1 1 P
X DB_5 A05 -550 1300 225 R 50 50 1 1 P
X DB_3 A06 -550 1500 225 R 50 50 1 1 P
X DB_1 A07 -550 1700 225 R 50 50 1 1 P
X ~WR A08 300 1200 225 R 50 50 1 1 P
X ~MREQ A09 300 1600 225 R 50 50 1 1 P
X ~IEO A10 300 100 225 R 50 50 1 1 P
X AB_14 A11 -550 -500 225 R 50 50 1 1 P
X AB_12 A12 -550 -300 225 R 50 50 1 1 P
X AB_10 A13 -550 -100 225 R 50 50 1 1 P
X AB_08 A14 -550 100 225 R 50 50 1 1 P
X 5N A15 300 -1700 225 R 50 50 1 1 P
X AB_06 A16 -550 300 225 R 50 50 1 1 P
X AB_04 A17 -550 500 225 R 50 50 1 1 P
X AB_02 A18 -550 700 225 R 50 50 1 1 P
X AB_00 A19 -550 900 225 R 50 50 1 1 P
X ~RESET A20 300 500 225 R 50 50 1 1 P
X CLK A21 300 400 225 R 50 50 1 1 P
X ~IODI A22 300 1400 225 R 50 50 1 1 P
X ~NMI A23 300 -100 225 R 50 50 1 1 P
X ~WAIT A24 300 700 225 R 50 50 1 1 P
X ~RFSH A25 300 1100 225 R 50 50 1 1 P
X ~PM1 A26 300 1700 225 R 50 50 1 1 P
X ~BAO A27 300 -300 225 R 50 50 1 1 P
X 12P A28 300 -700 225 R 50 50 1 1 P
X 5P A29 300 -900 225 R 50 50 1 1 P
X GND C01 300 -1200 225 R 50 50 1 1 P
X GND C02 300 -1400 225 R 50 50 1 1 P
X 12N C03 300 -2000 225 R 50 50 1 1 P
X DB_6 C04 -550 1200 225 R 50 50 1 1 P
X DB_4 C05 -550 1400 225 R 50 50 1 1 P
X DB_2 C06 -550 1600 225 R 50 50 1 1 P
X DB_0 C07 -550 1800 225 R 50 50 1 1 P
X ~RD C08 300 1300 225 R 50 50 1 1 P
X ~MEMDI C09 300 1800 225 R 50 50 1 1 P
X ~IEI C10 300 200 225 R 50 50 1 1 P
X AB_15 C11 -550 -600 225 R 50 50 1 1 P
X AB_13 C12 -550 -400 225 R 50 50 1 1 P
X AB_11 C13 -550 -200 225 R 50 50 1 1 P
X AB_09 C14 -550 0 225 R 50 50 1 1 P
X 5N C15 300 -1800 225 R 50 50 1 1 P
X AB_07 C16 -550 200 225 R 50 50 1 1 P
X AB_05 C17 -550 400 225 R 50 50 1 1 P
X AB_03 C18 -550 600 225 R 50 50 1 1 P
X AB_01 C19 -550 800 225 R 50 50 1 1 P
X ~BUSRQ C20 300 -500 225 R 50 50 1 1 P
X GND C21 300 -1500 225 R 50 50 1 1 P
X GND C22 300 -1600 225 R 50 50 1 1 P
X ~INT C23 300 0 225 R 50 50 1 1 P
X ~IORQ C24 300 1500 225 R 50 50 1 1 P
X CASG C25 300 1000 225 R 50 50 1 1 P
X ~HALT C26 300 800 225 R 50 50 1 1 P
X ~BAI C27 300 -400 225 R 50 50 1 1 P
X 12P C28 300 -800 225 R 50 50 1 1 P
X 5P C29 300 -1000 225 R 50 50 1 1 P
ENDDRAW
ENDDEF
Seitenanfang Seitenende
Profil || Private Nachricht || Suche Zitatantwort || Editieren || Löschen
004
06.10.2021, 18:40 Uhr
HolgerT



 3. Datei K1520_EFS2x29_DIN_male.kicad_mod:

Quellcode:

(module K1520_EFS2x29_DIN_male (layer F.Cu) (tedit 5D68D8DF)
  (tags "K1520 Z80")
  (fp_text reference REF** (at 1.4 -1) (layer F.SilkS)
    (effects (font (size 1 1) (thickness 0.15)) (justify left))
  )
  (fp_text value K1520_EFS+DIN_male (at -1.4 -1) (layer F.Fab)
    (effects (font (size 1 1) (thickness 0.15)) (justify right))
  )
  (fp_line (start 46.99 -5.08) (end -46.99 -5.08) (layer F.SilkS) (width 0.2))
  (fp_line (start -41.91 7.62) (end 41.91 7.62) (layer F.SilkS) (width 0.2))
  (fp_line (start 41.91 7.62) (end 41.91 0) (layer F.SilkS) (width 0.2))
  (fp_line (start 41.91 0) (end 46.99 0) (layer F.SilkS) (width 0.2))
  (fp_line (start 46.99 0) (end 46.99 -5.08) (layer F.SilkS) (width 0.2))
  (fp_line (start -46.99 0) (end -41.91 0) (layer F.SilkS) (width 0.2))
  (fp_line (start -41.91 0) (end -41.91 7.62) (layer F.SilkS) (width 0.2))
  (fp_line (start -46.99 -5.08) (end -46.99 0) (layer F.SilkS) (width 0.2))
  (fp_circle (center -44.4373 -2.7559) (end -42.9373 -2.7559) (layer F.SilkS) (width 0.1))
  (fp_line (start -46.3423 -2.7559) (end -42.5323 -2.7559) (layer F.SilkS) (width 0.1))
  (fp_line (start -44.4373 -4.6609) (end -44.4373 -0.8509) (layer F.SilkS) (width 0.1))
  (fp_line (start 42.545 -2.7686) (end 46.355 -2.7686) (layer F.SilkS) (width 0.1))
  (fp_line (start 44.45 -4.6736) (end 44.45 -0.8636) (layer F.SilkS) (width 0.1))
  (fp_circle (center 44.45 -2.7686) (end 45.95 -2.7686) (layer F.SilkS) (width 0.1))
  (fp_circle (center -39.37 -5.3086) (end -39.87 -5.3086) (layer F.SilkS) (width 0.1))
  (fp_circle (center 36.83 -5.3086) (end 37.33 -5.3086) (layer F.SilkS) (width 0.1))
  (fp_circle (center 39.37 -5.3086) (end 39.87 -5.3086) (layer F.SilkS) (width 0.1))
  (fp_circle (center -39.37 -10.3886) (end -39.87 -10.3886) (layer F.SilkS) (width 0.1))
  (fp_circle (center 36.83 -10.3886) (end 37.33 -10.3886) (layer F.SilkS) (width 0.1))
  (fp_circle (center 39.37 -10.3886) (end 39.87 -10.3886) (layer F.SilkS) (width 0.1))
  (fp_line (start -44 -2.5) (end 44 -2.5) (layer F.SilkS) (width 0.2))
  (fp_line (start -44 -2.5) (end -44 -10.5) (layer F.SilkS) (width 0.2))
  (fp_line (start -44 -10.5) (end 44 -10.5) (layer F.SilkS) (width 0.2))
  (fp_line (start 44 -10.5) (end 44 -2.5) (layer F.SilkS) (width 0.2))
  (fp_line (start 39 -2.5) (end 39 4.5) (layer F.SilkS) (width 0.2))
  (fp_line (start 39 4.5) (end -39 4.5) (layer F.SilkS) (width 0.2))
  (fp_line (start -39 4.5) (end -39 -2.5) (layer F.SilkS) (width 0.2))
  (fp_circle (center -41.25 -5) (end -42.75 -5) (layer F.SilkS) (width 0.1))
  (fp_line (start -41.25 -7) (end -41.25 -3) (layer F.SilkS) (width 0.1))
  (fp_line (start -43.25 -5) (end -39.25 -5) (layer F.SilkS) (width 0.1))
  (fp_circle (center 41.25 -5) (end 39.75 -5) (layer F.SilkS) (width 0.1))
  (fp_line (start 41.25 -7) (end 41.25 -3) (layer F.SilkS) (width 0.1))
  (fp_line (start 39.25 -5) (end 43.25 -5) (layer F.SilkS) (width 0.1))
  (fp_line (start 0 -1.5) (end 0 1.5) (layer F.SilkS) (width 0.25))
  (fp_line (start -1.5 0) (end 1.5 0) (layer F.SilkS) (width 0.25))
  (fp_text user "Bestückung EFS oder DIN / bei Bestückung DIN: 6 Pins abkneifen" (at -37.5 1.5) (layer Dwgs.User)
    (effects (font (size 1.1 1.1) (thickness 0.15)) (justify left))
  )
  (fp_text user "Bohrungen nach Bedarf erweitern: M2, 2.5mm, M3, 3mm" (at -37.5 3) (layer Dwgs.User)
    (effects (font (size 1.1 1.1) (thickness 0.15)) (justify left))
  )
  (pad "" thru_hole circle (at -44.45 -2.7686) (size 1.61 1.61) (drill 1.6) (layers *.Cu *.Mask))
  (pad "" thru_hole circle (at 44.45 -2.7686) (size 1.61 1.61) (drill 1.6) (layers *.Cu *.Mask))
  (pad A01 thru_hole circle (at -36.83 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A02 thru_hole circle (at -34.29 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A04 thru_hole circle (at -29.21 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A05 thru_hole circle (at -26.67 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A06 thru_hole circle (at -24.13 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A07 thru_hole circle (at -21.59 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A08 thru_hole circle (at -19.05 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A09 thru_hole circle (at -16.51 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A10 thru_hole circle (at -13.97 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A11 thru_hole circle (at -11.43 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A12 thru_hole circle (at -8.89 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A13 thru_hole circle (at -6.35 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A14 thru_hole circle (at -3.81 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A15 thru_hole circle (at -1.27 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A16 thru_hole circle (at 1.27 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A17 thru_hole circle (at 3.81 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A18 thru_hole circle (at 6.35 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A19 thru_hole circle (at 8.89 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A20 thru_hole circle (at 11.43 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A21 thru_hole circle (at 13.97 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A22 thru_hole circle (at 16.51 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A23 thru_hole circle (at 19.05 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A24 thru_hole circle (at 21.59 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A25 thru_hole circle (at 24.13 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A26 thru_hole circle (at 26.67 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A27 thru_hole circle (at 29.21 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A28 thru_hole circle (at 31.75 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad A29 thru_hole circle (at 34.29 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C01 thru_hole circle (at -36.83 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C02 thru_hole circle (at -34.29 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C03 thru_hole circle (at -31.75 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C04 thru_hole circle (at -29.21 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C05 thru_hole circle (at -26.67 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C06 thru_hole circle (at -24.13 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C07 thru_hole circle (at -21.59 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C08 thru_hole circle (at -19.05 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C09 thru_hole circle (at -16.51 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C10 thru_hole circle (at -13.97 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C11 thru_hole circle (at -11.43 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C12 thru_hole circle (at -8.89 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C13 thru_hole circle (at -6.35 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C14 thru_hole circle (at -3.81 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C15 thru_hole circle (at -1.27 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C16 thru_hole circle (at 1.27 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C17 thru_hole circle (at 3.81 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C18 thru_hole circle (at 6.35 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C19 thru_hole circle (at 8.89 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C20 thru_hole circle (at 11.43 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C21 thru_hole circle (at 13.97 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C22 thru_hole circle (at 16.51 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C23 thru_hole circle (at 19.05 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C24 thru_hole circle (at 21.59 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C25 thru_hole circle (at 24.13 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C26 thru_hole circle (at 26.67 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C27 thru_hole circle (at 29.21 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C28 thru_hole circle (at 31.75 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C29 thru_hole circle (at 34.29 -10.3886) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad "" thru_hole circle (at -41.25 -5) (size 1.61 1.61) (drill 1.6) (layers *.Cu *.Mask))
  (pad "" thru_hole circle (at 41.25 -5) (size 1.61 1.61) (drill 1.6) (layers *.Cu))
  (pad C01 thru_hole circle (at -35 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C02 thru_hole circle (at -32.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C03 thru_hole circle (at -30 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C04 thru_hole circle (at -27.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C05 thru_hole circle (at -25 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C06 thru_hole circle (at -22.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C07 thru_hole circle (at -20 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C08 thru_hole circle (at -17.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C09 thru_hole circle (at -15 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C10 thru_hole circle (at -12.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C11 thru_hole circle (at -10 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C12 thru_hole circle (at -7.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C13 thru_hole circle (at -5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C14 thru_hole circle (at -2.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C15 thru_hole circle (at 0 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C16 thru_hole circle (at 2.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C17 thru_hole circle (at 5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C18 thru_hole circle (at 7.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C19 thru_hole circle (at 10 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C20 thru_hole circle (at 12.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C21 thru_hole circle (at 15 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C22 thru_hole circle (at 17.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C23 thru_hole circle (at 20 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C24 thru_hole circle (at 22.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C25 thru_hole circle (at 25 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C26 thru_hole circle (at 27.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C27 thru_hole circle (at 30 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C28 thru_hole circle (at 32.5 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad C29 thru_hole circle (at 35 -17.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A01 thru_hole circle (at -35 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A02 thru_hole circle (at -32.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A03 thru_hole circle (at -30 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A04 thru_hole circle (at -27.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A05 thru_hole circle (at -25 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A06 thru_hole circle (at -22.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A07 thru_hole circle (at -20 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A08 thru_hole circle (at -17.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A09 thru_hole circle (at -15 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A10 thru_hole circle (at -12.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A11 thru_hole circle (at -10 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A12 thru_hole circle (at -7.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A13 thru_hole circle (at -5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A14 thru_hole circle (at -2.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A15 thru_hole circle (at 0 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A16 thru_hole circle (at 2.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A17 thru_hole circle (at 5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A18 thru_hole circle (at 7.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A19 thru_hole circle (at 10 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A20 thru_hole circle (at 12.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A21 thru_hole circle (at 15 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A22 thru_hole circle (at 17.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A23 thru_hole circle (at 20 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A24 thru_hole circle (at 22.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A25 thru_hole circle (at 25 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A26 thru_hole circle (at 27.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A27 thru_hole circle (at 30 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A28 thru_hole circle (at 32.5 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A29 thru_hole circle (at 35 -12.5) (size 1.4 1.4) (drill 0.8) (layers *.Cu *.Mask))
  (pad A03 thru_hole circle (at -31.75 -5.3086) (size 1.4 1.4) (drill 1) (layers *.Cu *.Mask))
  (pad C01 smd custom (at -35 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0.75 12.2) (end 0.75 7.1) (width 1.25))
      (gr_line (start 0.75 7.1) (end 2.55 5) (width 1.25))
      (gr_line (start -1.8 12.2) (end -1.8 7.05) (width 1.25))
      (gr_line (start 2.55 5) (end 2.55 0) (width 1.25))
      (gr_line (start 2.55 0) (end 0.05 0) (width 1.25))
      (gr_line (start 0.05 0) (end 0.05 5) (width 1.25))
      (gr_line (start 0.05 5) (end -1.8 7.1) (width 1.25))
      (gr_line (start -1.8 7.1) (end 0.7 7.1) (width 1.25))
      (gr_line (start 2.55 5) (end 0.1 5) (width 1.25))
      (gr_line (start 0.75 12.2) (end -1.8 12.2) (width 1.25))
    ))
  (pad C02 smd custom (at -34.3 -10.4) (size 1.4 1.4) (layers F.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 1 2.05) (end 0 1.05) (width 1.25))
      (gr_line (start 0 0) (end 0 1.05) (width 1.25))
      (gr_line (start 48.25 1.05) (end 47.25 2.05) (width 1.25))
      (gr_line (start 48.25 1.05) (end 48.25 0) (width 1.25))
      (gr_line (start 47.25 2.05) (end 1 2.05) (width 1.25))
    ))
  (pad C02 smd custom (at -32.5 -17.5) (size 1.4 1.4) (layers F.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 47.5 1.05) (end 46.5 2.05) (width 1.25))
      (gr_line (start 47.5 1.05) (end 47.5 0) (width 1.25))
      (gr_line (start 1 2.05) (end 46.5 2.05) (width 1.25))
      (gr_line (start 1 2.05) (end 0 1.05) (width 1.25))
      (gr_line (start 0 0) (end 0 1.05) (width 1.25))
    ))
  (pad C21 smd custom (at 13.95 -10.4) (size 1.4 1.4) (layers F.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 2.55 0) (width 1.25))
    ))
  (pad C21 smd custom (at 15 -17.5) (size 1.4 1.4) (layers F.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 2.5 0) (width 1.25))
    ))
  (pad C03 smd custom (at -30 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.75 12.2) (end -1.75 7.1) (width 1.25))
      (gr_line (start -1.75 7.1) (end 0 5) (width 1.25))
      (gr_line (start 0 5) (end 0 0) (width 1.25))
    ))
  (pad A04 smd custom (at -27.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -0.4 3.5) (end -1.7 4.8) (width 0.25))
      (gr_line (start -1.7 4.8) (end -1.7 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end -0.4 1.3) (width 0.25))
      (gr_line (start -0.4 1.3) (end -0.4 3.5) (width 0.25))
    ))
  (pad C04 smd custom (at -27.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.7 6.1) (end -1.2 5.6) (width 0.25))
      (gr_line (start -1.2 5.6) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.7 7.1) (end -1.7 6.1) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
    ))
  (pad C05 smd custom (at -25 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.2 5.6) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start -1.7 7.1) (end -1.7 6.1) (width 0.25))
      (gr_line (start -1.7 6.1) (end -1.2 5.6) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C06 smd custom (at -22.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.2 5.7) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.6 7.1) (end -1.6 6.1) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start -1.6 6.1) (end -1.2 5.7) (width 0.25))
    ))
  (pad C07 smd custom (at -20 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.6 6.1) (end -1.2 5.7) (width 0.25))
      (gr_line (start -1.6 7.1) (end -1.6 6.1) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start -1.2 5.7) (end -1.2 2.7) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C08 smd custom (at -17.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.5 6.1) (end -1.2 5.8) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1.2 5.8) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start -1.5 7.1) (end -1.5 6.1) (width 0.25))
    ))
  (pad C09 smd custom (at -15 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.5 7.1) (end -1.5 6.1) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1.2 5.8) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start -1.5 6.1) (end -1.2 5.8) (width 0.25))
    ))
  (pad C10 smd custom (at -12.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start -1.2 5.8) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.5 6.1) (end -1.2 5.8) (width 0.25))
      (gr_line (start -1.5 7.1) (end -1.5 6.1) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C11 smd custom (at -10 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1.4 6.1) (end -1.2 5.9) (width 0.25))
      (gr_line (start -1.2 5.9) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.4 7.1) (end -1.4 6.1) (width 0.25))
    ))
  (pad C12 smd custom (at -7.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.4 7.1) (end -1.4 6.1) (width 0.25))
      (gr_line (start -1.4 6.1) (end -1.2 5.9) (width 0.25))
      (gr_line (start -1.2 5.9) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C13 smd custom (at -5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1.4 6.1) (end -1.2 5.9) (width 0.25))
      (gr_line (start -1.2 5.9) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start -1.4 7.1) (end -1.4 6.1) (width 0.25))
    ))
  (pad C14 smd custom (at -2.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.3 7.1) (end -1.3 6.1) (width 0.25))
      (gr_line (start -1.3 6.1) (end -1.2 6) (width 0.25))
      (gr_line (start -1.2 6) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C16 smd custom (at 2.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1.2 7.1) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
    ))
  (pad C17 smd custom (at 5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.2 7.1) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C18 smd custom (at 7.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.2 7.2) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C19 smd custom (at 10 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.1 6.1) (end -1.2 6) (width 0.25))
      (gr_line (start -1.2 6) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1.1 7.1) (end -1.1 6.1) (width 0.25))
    ))
  (pad C20 smd custom (at 12.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.1 7.1) (end -1.1 6.1) (width 0.25))
      (gr_line (start -1.1 6.1) (end -1.2 6) (width 0.25))
      (gr_line (start -1.2 6) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C23 smd custom (at 20 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1 7.1) (end -1 6.1) (width 0.25))
      (gr_line (start -1 6.1) (end -1.2 5.9) (width 0.25))
      (gr_line (start -1.2 5.9) (end -1.2 2.7) (width 0.25))
    ))
  (pad C24 smd custom (at 22.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -0.9 7.1) (end -0.9 6.1) (width 0.25))
      (gr_line (start -0.9 6.1) (end -1.2 5.8) (width 0.25))
      (gr_line (start -1.2 5.8) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C25 smd custom (at 25 -17.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -0.9 7.1) (end -0.9 6.1) (width 0.25))
      (gr_line (start -0.9 6.1) (end -1.2 5.8) (width 0.25))
      (gr_line (start -1.2 5.8) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad C26 smd custom (at 27.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -0.8 7.1) (end -0.8 6.1) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
      (gr_line (start -1.2 2.7) (end -1.2 5.7) (width 0.25))
      (gr_line (start -1.2 5.7) (end -0.8 6.1) (width 0.25))
    ))
  (pad C27 smd custom (at 30 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -0.8 7.1) (end -0.8 6.1) (width 0.25))
      (gr_line (start -0.8 6.1) (end -1.2 5.7) (width 0.25))
      (gr_line (start -1.2 5.7) (end -1.2 2.7) (width 0.25))
      (gr_line (start -1.2 2.7) (end 0 1.5) (width 0.25))
      (gr_line (start 0 1.5) (end 0 0) (width 0.25))
    ))
  (pad A05 smd custom (at -25 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -0.4 1.3) (end -0.4 3.5) (width 0.25))
      (gr_line (start -0.4 3.5) (end -1.7 4.8) (width 0.25))
      (gr_line (start -1.7 4.8) (end -1.7 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end -0.4 1.3) (width 0.25))
    ))
  (pad A06 smd custom (at -22.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end -0.4 1.3) (width 0.25))
      (gr_line (start -0.4 1.3) (end -0.4 3.5) (width 0.25))
      (gr_line (start -0.4 3.5) (end -1.6 4.7) (width 0.25))
      (gr_line (start -1.6 4.7) (end -1.6 7.2) (width 0.25))
    ))
  (pad A07 smd custom (at -20 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end -0.3 1.2) (width 0.25))
      (gr_line (start -0.3 1.2) (end -0.3 3.5) (width 0.25))
      (gr_line (start -0.3 3.5) (end -1.6 4.8) (width 0.25))
      (gr_line (start -1.6 4.8) (end -1.6 7.2) (width 0.25))
    ))
  (pad A08 smd custom (at -17.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -0.3 3.5) (end -1.6 4.8) (width 0.25))
      (gr_line (start -1.6 4.8) (end -1.6 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end -0.3 1.2) (width 0.25))
      (gr_line (start -0.3 1.2) (end -0.3 3.5) (width 0.25))
    ))
  (pad A09 smd custom (at -15 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end -0.2 1.1) (width 0.25))
      (gr_line (start -0.2 1.1) (end -0.2 3.5) (width 0.25))
      (gr_line (start -0.2 3.5) (end -1.5 4.8) (width 0.25))
      (gr_line (start -1.5 4.8) (end -1.5 7.2) (width 0.25))
    ))
  (pad A10 smd custom (at -12.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0.9) (end -0.2 1.1) (width 0.25))
      (gr_line (start -0.2 1.1) (end -0.2 3.5) (width 0.25))
      (gr_line (start -0.2 3.5) (end -1.5 4.8) (width 0.25))
      (gr_line (start -1.5 4.8) (end -1.5 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
    ))
  (pad A11 smd custom (at -10 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end -0.1 1) (width 0.25))
      (gr_line (start -0.1 1) (end -0.1 3.5) (width 0.25))
      (gr_line (start -0.1 3.5) (end -1.4 4.8) (width 0.25))
      (gr_line (start -1.4 4.8) (end -1.4 7.2) (width 0.25))
    ))
  (pad A12 smd custom (at -7.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end -0.1 1) (width 0.25))
      (gr_line (start -0.1 1) (end -0.1 3.5) (width 0.25))
      (gr_line (start -0.1 3.5) (end -1.4 4.8) (width 0.25))
      (gr_line (start -1.4 4.8) (end -1.4 7.2) (width 0.25))
    ))
  (pad A13 smd custom (at -5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -0.1 1) (end -0.1 3.5) (width 0.25))
      (gr_line (start -0.1 3.5) (end -1.4 4.8) (width 0.25))
      (gr_line (start -1.4 4.8) (end -1.4 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end -0.1 1) (width 0.25))
    ))
  (pad A14 smd custom (at -2.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (zone_connect 0)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0.9) (end -0.1 1) (width 0.25))
      (gr_line (start -0.1 1) (end -0.1 3.5) (width 0.25))
      (gr_line (start -0.1 3.5) (end -1.3 4.7) (width 0.25))
      (gr_line (start -1.3 4.7) (end -1.3 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
    ))
  (pad A16 smd custom (at 2.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.2 4.8) (end -1.2 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.1 1) (width 0.25))
      (gr_line (start 0.1 1) (end 0.1 3.5) (width 0.25))
      (gr_line (start 0.1 3.5) (end -1.2 4.8) (width 0.25))
    ))
  (pad A17 smd custom (at 5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.1 1) (width 0.25))
      (gr_line (start 0.1 1) (end 0.1 3.5) (width 0.25))
      (gr_line (start 0.1 3.5) (end -1.2 4.8) (width 0.25))
      (gr_line (start -1.2 4.8) (end -1.2 7.2) (width 0.25))
    ))
  (pad A18 smd custom (at 7.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0.1 1) (end 0.1 3.5) (width 0.25))
      (gr_line (start 0.1 3.5) (end -1.2 4.8) (width 0.25))
      (gr_line (start -1.2 4.8) (end -1.2 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.1 1) (width 0.25))
    ))
  (pad A19 smd custom (at 10 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0.9) (end 0.2 1.1) (width 0.25))
      (gr_line (start 0.2 1.1) (end 0.2 3.5) (width 0.25))
      (gr_line (start 0.2 3.5) (end -1.1 4.8) (width 0.25))
      (gr_line (start -1.1 4.8) (end -1.1 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
    ))
  (pad A20 smd custom (at 12.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.2 1.1) (width 0.25))
      (gr_line (start 0.2 1.1) (end 0.2 3.5) (width 0.25))
      (gr_line (start 0.2 3.5) (end -1.1 4.8) (width 0.25))
      (gr_line (start -1.1 4.8) (end -1.1 7.2) (width 0.25))
    ))
  (pad A21 smd custom (at 15 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0.2 3.5) (end -1 4.7) (width 0.25))
      (gr_line (start -1 4.7) (end -1 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.2 1.1) (width 0.25))
      (gr_line (start 0.2 1.1) (end 0.2 3.5) (width 0.25))
    ))
  (pad A22 smd custom (at 17.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.3 1.2) (width 0.25))
      (gr_line (start 0.3 1.2) (end 0.3 3.5) (width 0.25))
      (gr_line (start 0.3 3.5) (end -1 4.8) (width 0.25))
      (gr_line (start -1 4.8) (end -1 7.2) (width 0.25))
    ))
  (pad A23 smd custom (at 20 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0.9) (end 0.3 1.2) (width 0.25))
      (gr_line (start 0.3 1.2) (end 0.3 3.5) (width 0.25))
      (gr_line (start 0.3 3.5) (end -0.9 4.7) (width 0.25))
      (gr_line (start -0.9 4.7) (end -0.9 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
    ))
  (pad A24 smd custom (at 22.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.3 1.2) (width 0.25))
      (gr_line (start 0.3 1.2) (end 0.3 3.5) (width 0.25))
      (gr_line (start 0.3 3.5) (end -0.9 4.7) (width 0.25))
      (gr_line (start -0.9 4.7) (end -0.9 7.2) (width 0.25))
    ))
  (pad A25 smd custom (at 25 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0.4 3.5) (end -0.9 4.8) (width 0.25))
      (gr_line (start -0.9 4.8) (end -0.9 7.2) (width 0.25))
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.4 1.3) (width 0.25))
      (gr_line (start 0.4 1.3) (end 0.4 3.5) (width 0.25))
    ))
  (pad A26 smd custom (at 27.5 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.4 1.3) (width 0.25))
      (gr_line (start 0.4 1.3) (end 0.4 3.5) (width 0.25))
      (gr_line (start 0.4 3.5) (end -0.8 4.7) (width 0.25))
      (gr_line (start -0.8 4.7) (end -0.8 7.2) (width 0.25))
    ))
  (pad A27 smd custom (at 30 -12.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 0.9) (width 0.25))
      (gr_line (start 0 0.9) (end 0.4 1.3) (width 0.25))
      (gr_line (start 0.4 1.3) (end 0.4 3.5) (width 0.25))
      (gr_line (start 0.4 3.5) (end -0.8 4.7) (width 0.25))
      (gr_line (start -0.8 4.7) (end -0.8 7.2) (width 0.25))
    ))
  (pad C28 smd custom (at 32.5 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -0.75 7.1) (end 0 5) (width 1.25))
      (gr_line (start -0.75 12.2) (end -0.75 7.1) (width 1.25))
      (gr_line (start 0 5) (end 0 0) (width 1.25))
    ))
  (pad C29 smd custom (at 35 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start 0 0) (end 0 5) (width 1.25))
      (gr_line (start 0 5) (end -0.7 7.1) (width 1.25))
      (gr_line (start -0.7 7.1) (end -0.7 12.2) (width 1.25))
    ))
  (pad C15 smd custom (at 0 -17.5) (size 1.4 1.4) (layers B.Cu)
    (options (clearance outline) (anchor circle))
    (primitives
      (gr_line (start -1.25 7.1) (end 0 5) (width 1.25))
      (gr_line (start 0 5) (end 0 0) (width 1.25))
      (gr_line (start -1.25 12.2) (end -1.25 7.1) (width 1.25))
    ))
)
Seitenanfang Seitenende
Profil || Private Nachricht || Suche Zitatantwort || Editieren || Löschen
005
06.10.2021, 18:53 Uhr
HolgerT



 Hier noch ein Bild des Layouts mit Bemaßung:



Ich sehe gerade, das mit den Bohrungen ist möglicherweise mißverständlich. Soll heißen: Alle Befestigungsbohrungen sind im Durchmesser von 1,6mm für M2 Schraubengewinde. Aufbohren auf:
* 2mm für M2 Schraube mit Gegenmutter
* 2,5mm für M3 Schraubengewinde
* 3mm für M3 Schraube mit Gegenmutter

Gruß
Holger T.
Dieser Beitrag wurde am 06.10.2021 um 19:00 Uhr von HolgerT editiert.
Seitenanfang Seitenende
Profil || Private Nachricht || Suche Zitatantwort || Editieren || Löschen
006
06.10.2021, 22:11 Uhr
ambrosius



 Vielen Dank, das kann man ja öfter mal gebrauchen!
--
viele Grüße
Holger
Seitenanfang Seitenende
Profil || Private Nachricht || Suche Zitatantwort || Editieren || Löschen
Seiten: -1-     [ Technische Diskussionen ]  



Robotrontechnik-Forum

powered by ThWboard 3 Beta 2.84-php5
© by Paul Baecher & Felix Gonschorek